This 192 channel DMX controller has a joystick can be programmed to control certain channels. This is then an ideal tool to fine tune the pan and tilt movements on a moving head or scanner. It comes complete with an LED Goose-neck light that can be plugged in to the rear and help in dark situations. The control itself has 12 scanner buttons each controls up to 16 channels on each fixture. There are 30 programmable bank buttons holding 8 scenes each. These scenes can be programmed into 6 Chase sequences each holding up to 240 scene which can be triggered either by sound, manually by tap or automatically by the time faders between 0.1 seconds and 10 minutes. This controller is ideal for controlling a small theatre or stage.

  • High quality LCD display with easy readout
  • Joystick to control X & Y parameters of a moving head / scanner
  • 12 scanners each with 16 channels
  • 30 banks each with 8 programmable scenes (240 scenes in total)
  • 8 channel slider with page up and page down
  • 6 Chase banks
  • Music, auto or manually triggered chase sequences
  • Speed control from 0.1 second to 10 minutes
  • MIDI connection facility (MIDI IN) to run the unit synchronous with your MIDI unit or compatible software
  • Blackout button
  • File dump allows data to be sent or received between two units
  • Built in microphone or LINE IN RCA jack socket for accurate audio triggering
  • LED Goose-neck lamp provided
  • DMX polarity switch at the rear
  • 19" rack mount
  • Power failure memory

Power supply 12Vdc, 300mA
Dimensions 482 x 190 x 90mm

Weight  3.0kg

 << Back